From Openembed
WINCE Software Quick Reference
File:KIT2416-wince-software-quick-ref.pdf
Wince FAQ[转载]
File:Wince-faq.pdf
Wince 5 Image buring
| Image Name | Download URL | Description
|
| IROM_Fusing_Tool.exe | File:IROM Fusing Tool.rar | Burning tool(windows version) for fusing image into SD card/T-flash card
|
| SD: IROM_SD_EBOOT.nb0 | File:IROM SD EBOOT.rar | bootstrap image for burning into SD card/T-flash card if select SD boot mode of KIT2416
|
| Nand: block0.nb0 | File:Block0.rar | Image for fusing into SOM2416 on-board NAND(only for K9G8G08) under eboot command line console
|
| CE5 NK.bin Image 1 | File:Xip-保存注册-识别U盘.rar | wince 5 system image: Chinese Version
|
| CE5 NK.bin Image 2 | File:Xip-english.rar | wince 5 system image: English Version
|
| IROM_Fusing_Tool.exe | File:IROM Fusing Tool.rar | Burning tool(windows version) for fusing image into SD card/T-flash card
|
Wince 6 Image buring
Burning Instruction(Visitors revise it are welcome!)
- using File:IROM Fusing Tool.rar to fusing/burning IROM_SD_EBOOT.nb0 into SD/MMC/T-Flash card
- Using Samsung DNW tool: File:DNW-0.6C.rar, select USB port->UBOOT->UBOOT to download NK.bin/xip.bin onto the KIT memory
- buring/uploading sequence: STEPLDR.nb0 -> EBOOT.bin -> nk.bin
- Be assure that in the eboot Boot Menu, "6) Program disk image into SmartMedia card: Enabled" in Enabled state, otherwise would fail
- Except that, when you in the first time power up the board, You should select boot Menu:“9) Format Boot Media for BinFS”to format the Nand to correct state
- Be assure that the the SOM2416 on-board flash model is K9F2G08U0? or K9F4G08U0? instead of K9G8G08, and the pre-build image should support AT043TN52 4.3"(480x272pixels) LCD panel
Wince 6 Images
General Tools/Drivers
| Tools Name | Download URL | Description
|
| CP210x USB to UART | File:CP210x-usb-to-uart.rar | CP210x USB to UART(TTL) windows XP Driver
Use for KIT2416-II,J4 extend module
|
Wince 5/6 BSP src
Restric Access Only! Please send Your Name/What products you purchased/What time you purchased products/Your contact/Your e-mail to embed_support@techor.com to granted the wince bsp accessing username/password.
